The EN3LED is an energy-efficient harsh environment LED high bay vaportight series designed to replace fluorescent and HID lighting systems in commercial, institutional, and industrial applications that require a watertight seal. Using up to 65% less energy and operating for up to 116,000 hours (L70), the EN3LED series is ideal for indoor and outdoor applications including parking garages, canopies, food processing, cold storage, car washes, and swimming pools. The EN3LED series is DesignLights™ Consortium qualified.
- Energy efficient – up to 65% energy savings vs. fluorescent
- Up to 116,000 hour operating life (L70)
- Control friendy, 0-10V dimming, standard
- DesignLights™ Consortium Qualified
EN3 LED Configuration
Series Lens Distribution Wattage Color Temperature Voltage Options EN3LED FA = Frosted acrylic (standard)
CA = Clear acrylic
PCL = Clear polycarbonate
F = 100˚ beam spread 125 = 125W
238 = 238W
41 = 4100K CCT
50 = 5000K CCT
120-277V347 = 347V480 = 480V
ELS = Emergency Backup, 900lm
BP = Bulk Pack Palletized
EN3TS = Tamperproof screws
CP3 = Cord & Plug-120V Straight Blade with 6’ Cord*
Twist/Lock Cord & Plug: with 6’ Cord. Specify voltage:
12 = 120, 20 = 208, 24 = 240, 27 = 277, 34 = 347, 48 = 480*
PIR Occupancy Sensor; specify number of boards controlled:
For 125W units: 2, 4, or 6
For 238W units: 1, 2, 3, or 4
*Specify Ballast Factor: L = Low; N = Normal or H = High
Accessories ENTS = Tamperproof screws
EN3TSD = screwdriver for tamperproof screws
VHM = V-hook mounting kit
UMB = U-hook for close to ceiling mount
Adjustable Cables: includes (4) 72” steel aircraft cables with tool-free adjusters; for use with included mounting brackets or VHM V-hook mounting kit.
WLH = 1 Wet Location wire Hub
EN3LTK = Lens tether kitPhotometrics
- Simkar-EN3LED-Specs.pdf - Download
Housing 1-piece, corrosion proof reinforced fiberglass housing. Housing material to be UL 5VA noncombustible and f1 rated as suitable for outdoor use with respect to exposure to ultraviolet light, water, and immersion in accordance with UL 746C. Gasket to be a seamless, custom formulated, poured-in-place urethane, chemically attached to the housing and robotically applied to ensure consistency, accuracy, and reliability. IP67 rated for dust-free and water-free ingress protection (temporary submersion for 30 minutes). 1/2” NPT plugged entry holes on both ends. Wet location hub fittings sold separately. Integral aluminum rail for power supply attachment provides superior heat management.
LED Tray/lens/latching LED tray is die-formed, heavy gauge steel with high-gloss, baked white polyester finish over rust inhibiting phosphate coat. LED tray acts as heat sink to dissipate heat, maximizing the life of the LEDs. LED tray can be accessed without tools and is hinged for quick access and installation. EN3LED series is standard with injection molded, impact resistant, high transmission, frosted acrylic lens (FA). Optional clear acrylic (CA) or UV stabilized polycarbonate (PCL) lenses are available. Optional clear lenses have linear prisms and frosted ends to reduce glare. 100 degree beam spread. Lens is held securely in place by 12 captive stainless steel, positive lock over center cam latches. Cam latches are tamper proof ready.
LEDs Available in 2 light levels (delivered); 13,608 lumens (124.4W) and 22,825 lumens (232.5W) at 4100K CCT,>80 CRI. Also available in 5000K color temperature. LEDs are LM80 tested. Operating life is 72,000 hours (L70) for 125W fixture and 116,000 hours (L70) for 238W fixture. Light engines consist of 336 or 384 mid-power LED chips mounted on aluminum core printed circuit board. LED light engines are replaceable.
Electrical 120-277V LED power supplies, power factor >0.9. 0-10V dimmable, standard. Power supplies are mounted to an integral aluminum rail chemically bonded to the housing for cooler operation and longer life. Drive current is 1500 mA for 125W fixtures and 2100 mA for 238W fixtures. Three power supplies are used in the 125W fixture and four power supplies are used in the 238W fixture. Power supplies can be accessed from below without tools and are replaceable. The EN3LED series is designed to operate in temperatures of -40˚ F (-40˚ C) to 104˚F (40˚C) (125W units) and -40˚ F (-40˚ C) to 95˚F (35˚C) (238W units).
Mounting Fixture can be ceiling or suspended mounted. 1/2” NPT plugged entry holes provided on both ends. Wet location hub fittings sold separately. Stainless steel mounting brackets (included) for suspension by cable (cable not included). Other options include stainless steel V-hooks for chain hanging (chain not included) and stainless steel U-hooks (UMB) for close to ceiling mount, attaches directly to the ceiling with a 1-1/4” offset.
Listings C-UL-US listed wet location, IP67 rated. DesignLights Consortium Qualified for fuel pump canopy and high bay luminaires categories.
Warranty 5 year limited warranty.