Ideal for task, accent, cove, display and under & above cabinet lighting, the LEDUC LED Undercabinet luminaires provide a generous amount of warm white illumination while lasting 25 times longer than xenon and halogen systems and using only 1/10th of the energy. The integrated 120V power supply allows for easy installation and smooth dimming down to 10% using standard dimmers. The LEDUC series is available in 12”, 18” and 24” lengths, and can be either hardwired or installed using a variety of optional power and linking cords.
1” deep extruded aluminum housing with white painted finish and color-matched plastic end caps. Available in 12”, 18” and 24” lengths. LEDs are protected by a high-impact, clear acrylic lens. Modular design allows units to be linked together or hard wired in a continuous run. End caps contain integrated linking ports. Housing contains ½” diameter knockouts on back for direct wire installation. Removable wireway cover, held in place by two captive screws, provides access to power supply.
Utilizes a tightly clustered LED array mounted close to the lens surface for uniform light distribution. Available in 3 light levels (delivered): 400 lumens (12”L fixtures, 6.2W); 560 lumens (18”L fixtures, 8.6W); and 760 lumens (24”L fixtures, 11.3W). Color temperature is warm white, 3000K CCT, >80 CRI. LEDs are LM-80 tested. LED operating life is 50,000 hours (L70). Light engines consist of 16, 24 or 32 multi-chip LED packages mounted to a metal core PCB board.
Integrated 120V power supply, power factor >0.9. Power supply output current is 350 mA. Smooth dimming down to 10% of light output with most incandescent, magnetic low voltage, or electronic low voltage wall box dimmers. Contact Simkar for a list of suggested compatible dimmers. Contains an integrated on/off switch. Removable cover allows access to wire way and power supply.
Attaches to surfaces with two screws via mounting holes in end caps. Can be mounted horizontally or vertically. Housing has ½” diameter knock outs on back for direct wiring. Includes (1) ½” die-cast conduit connector. Direct wire any combination of fixtures together up to a 1200W load on a single run, subject to dimmer’s specifications. Fixture end caps contain integrated linking ports on both sides to accept optional power supply or linking cords. Utilizing linking cords, link together any combination of fixtures up to a 600W load subject to dimmer’s specifications.
UL Listed damp location, Energy Star Qualifed.
5 year limited warranty.Specifications
Series Size Accessories LEDUC 12 = 12″
18 = 18″
24 = 24″
LN1 = 1″ linking connector, white
LN3 = 3″ linking cord white
LN12 = 12″ linking cord white
LN24 = 24″ linking cord white
PC24 = 24″ power cord and plug
PC60 = 60″ power cord and plugPhotometrics
- LEDUC-Specs.pdf - Download